Chopper Chopper Motorcycles, page #24

Up for auction is a 2006 Orange County Chopper.  This was a custom, one off bike built for Oneida Casinos.  There is only 200 miles on the bike.  The bike has a RevTech 100ci engine, open primary, and RevTech 6 speed transmission.  This is built on a softail style frame with a rear suspension.  The bike is obviously all custom with a custom paint job.  The fuel tank is signed by Paul Sr. Original price of the bike was $70000.00. Bike is for sale locally and auction may be ended early.

2012 250cc custom chopper made in Taiwan with honda enginebike is brand new 00 miles maximum speed 75,buyer is responsible for shipping cost but i can help on arrangement.

 2003 Specialty constructed Chopper. Ultima Frame with Ultima 127ci motor and 5 spd Tranny. bad ass pipes.

for sale i have a custom build chopper ,bike was not titled yet ,just finish it ,less than 100 miles on the bike ,bike has Revtech frame (with MSO),revtech 100c engine mso also,and 6 speed revtech transmission mso also ,so i have all 3 mso for easy title process,all parts was purchased back in 2005 (all mso are date it 2005),bike ride really nice and look cool. Only serious buyers please,and if You are the winner please make sure You have Yours found ready. for more info call or text 773-510-4761

THIS IS A ONE OFF CUSTOM CHOPPER BUILT IN 2003 HAS 1500CC HARLEY MOTOR 12,000 MILES IS REGESTERED AND HAS CLEAR TITLE.I HAVE THE COMPLETE BUILD SHEETS. ANY THING EVER DONE TO THIS BIKE HAS BEEN DOCUMENTED WITH RECEPTS. BIKE IS AT FEO MOTOR SPORTS RIGHT NOW ITS GETTING A COMPLETE ONCE OVER.

Nice bike, rides very nice in comparison to normal rigid choppers. I'm not a biker, this is my bike, I made a trade with a friend because I thought I would ride. As it turns out I've put 50 miles on it in 8 or so months, and I don't have a good place to store it.

CUSTOM THEME ORANGE COUNTY CHOPPERS - OCC ONE OF A KIND     WEST VIRGINIA RIFLE TEAM THEME CHOPPER *ONLY ONE IN THE WORLD*   This is an OCC custom theme motorcycle. This unique themed chopper was built for the West Virginia University Rifle Team in the summer of 2004 as the Grand Prize of a team benefit. This Bike is a 4 Up T-Rex Soft-tail.

 This custom soft tail motorcycle was built in 2006 by Loren Graham, owner of G & S Cycles of Orchard Farms, Missouri. It is 9ft. 8in long with a 47 degree inverted front end rake.

2007 American Performance Chopper High Roller S Custom built in Las Vegas The motor is a 96 Cubic Inch S&S Carb Super E 300 Series rear Tire Baker 6 Speed Transmission hydraulic clutch Harley Davidson Primary Custom blue paint job with ghost skulls 7,500 Miles New Odyssey Battery I just changed the Primary fluid,Oil,Transmission Fluid, Fork oil ( complete with new seals) New front and rear brake fluid New Stator and Voltage Regulator New front and rear brake lines Front master Cylinder was just rebuilt New Lyndall Gold Front brakes New kuryaken Battery gauge *** The only 2 "issues" with the bike are A) The Rear diamond brake light above the license plate...The Led's blew when the original stator shorted, to pass inspection the owner I bought it from put black duct tape over the diamond. Your rear turn signal/running lights are also your brake lights. B) The Carburetor may need some tuning or cleaning ( I am clueless when it comes to carbs) when the bike is started up and idles for a few mins I can push the enrichment knob down half way and the idle is normal 900-1000 rpms,  after I ride it for a mile or two then I can cut the enrichment knob off all the way and it runs and restarts fine.  I ride the bike on the weekends and have no problems with it and I don't let it sit.

Custom Ultima 2010 Rigid Chopper MINT CONDITION MUST SEE!!!Turn keyVERY Reliable VERY Fast!!!!  120" Ultima motorRight Side Belt DriveHydraulic Clutch3-1/2 Open Drag Primary4-1/4 Bore  4-1/4 StrokeUltima 6 speed transMikuni 40mm Flat Side CarburetorManual Compression Release ButtonsRigid FrameBrand New Custom Paint JobBrand New Chrome & Black Powder Coated Wheels300 mm Rear Tire21" Front Wheel19" Rear Wheel140 + Horse Power 150 + MPH Any Questions Please AskNeed to Sell ASAP

 Selling my 2007 Chopper Nation Twister bike. Looks and runs like new.110ci polished motor. 6 speed polished trans.

THIS MOTORCYCLE WAS CUSTOM BUILT BY A PROFESSIONAL BUILDER AT TURBOZ CUSTOM CYCLES. EVERYTHING WORKS AND RUNS PERFECTLY. SHE IS CLEAN AND SIMPLE. IT IS TITLED AND REGISTERD IN THE STATE OF FLORIDA. THE ENGINE WAS CUSTOM BUILT USING POLISHED H-D CASES AND BALANCED S&S FLYWHEELS,RODS,PISTONS AND HEADS.

THIS BIKE IS BEING RE LISTED. PLEASE... IF YOU DONT HAVE THE CASH TO BUY, DO NOT BID!!!

CUSTOM BOBBER REVTECH HARLEY 100 ci $25,000 BUILD COST NOT COUNTING CUSTOM PAINT $30,000 TOTAL COST ONE OF A KIND - DYNO-TUNED 110 HP RUNS SWEET $10,000.00 FIRM • Brand New Revtech 100'' Engine • Kraft Tech Rigid Frame • Brand New BDL 3'' Open Primary • Brand New S&S Super E Carburetor • $4500.00 Custom Paint Job done by the AWARD WINNING artist Darren Williams, Owner of Liquid Illusions in Saint Louis, MO • 5 coats of gold metal flake with airbrush art work. • Chrome Carriage works billet wheels with matching brake rotors. • Avon tires, 21" front, 150 x 16" rear.

Winner of Daytona Bike Week Rats Hole and Boardwalk Shows 1842 cc, S&S 110 SE V- Twin Engine, stock this engine is rated @ 120hp & 128 ft.lbs torque Motor Hand Ported from the factory, Dual Plugged Heads 6 Up, And 4 Out, 45 Degree Rake Right Side Drive-Perfectly Balanced New Metzler Tires- 21” Front, 240 Rear, DNA-Deep Dish Chromed 120 Spoke Wheels Internal Hydraulic Clutch, and Internal Throttle Chromed Extended Billet Forward Controls Chromed Billet Custom Grips Chromed Hand Controls Brake/Clutch Chromed Oil Cap Chromed Chain Guard Chromed Brake and Clutch Reservoirs Chromed Air Cleaner Cover S&S Super G Carbs Stainless Steel Drive Chain BDL Open Belt Drive Custom Hand Made, Alligator Seat, Signed by the famous Jeff Phipps Custom Chromed Exile Brake Calipers Custom Chromed Riser Handlebar Custom Chromed Hurricane Headlight Custom Ceramic Coated Stainless Steel exhaust Braided SLatainless Fuel/Oil Lines layer After Layer of Candy Apple-Specked Green over Silver Base, Hand Painted Pin-Stripping- Silver With Purple Outline Only 625 Miles on this Show and Go Bike No Scratches, No Blemishes Garage Stored

2006 Saxon Griffin with only 6800 aprox miles This bike is a beauty has a showed polished 111ci S&S engine and S&S E carb, 6 speed RSD tranny and 300mm rear tire to put the power to the ground. the frame has 40 degree rake with another 3 in the triple clamp 43degrees total, inverted forkes that are 11 inches over bike is 9 feet in total length. custom wheels with matching rotors and pulleys.custom paint with flames and ghost flames, powder coated frame.crane HD ignition,blue LED accent lights, eched case cover.softtail with hidden shocks.

 This 2003 BMC Chopper has a 100 cubic inch RevTech engine and it absolutely rips! Only 5,700 miles are on this adult owned, beautiful chopper. The black with purple ghost flames paint combined with the clean, un-cluttered styling, this chopper is a sure attention getter!

LIKE NEW..LESS THAN 2000 MILES. KEPT IN A/C. PURCHASED 4 YEARS AGO FOR $48,000.

2005 getting high frame, 100 ci Altima motor, 5"primary belt, MP brakes, 6-speed tranny, WILL NEGOTIATE. Contact # 518-810-9732

 2003  BMC Notorious Custom Built Chopper ( Big Mikes Cycles ), AWESOME BIKE !! .    It has a brand new custom paint job on it ( Matrix- Purple pearl and Silver,  $3500.00 ) , new brake pads front and back, Dyna 2000 electronic ignition, new offset front  / drive belt sprocket, ( dry belt primary) new stainless braided oil lines, fresh oil and filter, new grips, new plugs and performance wires, new billet aluminum headlight.      The custom exhaust, rear tire is a 250 Avon, and Avon tire in front, chrome on wheels is like new, the clutch lever has a little bit of chrome that has flaked off where your fingers grab.

2006 CUSTOM PRO STREET BIG BEAR SLED CHOPPER,THE BIKE HAS MANY UPGRADES,A REAL HEAD TURNER.BIKE HAS BEEN IN V TWIN MAGAZINE CENTERFOLD,MAGAZINE COME WITH BIKE. THIS TROPHY WINNING BIKE HAS WON MANY EVENTS.LOTS OF CUSTOM PARTS.BIKE IS IN CLEAN CONDITION,RUNS GREAT.I WILLHELP IN ARRANGE SHIPPING IN ANY WAY OR PICK UP .

Counts Kustoms High Roller, 1 of a kind, brand new 2006 Counts Kustoms chopper Rigid Santee Frame 6 inch stretch on the down tube 45 degree rake 25 over stock, Sugar Bear Springer with the #4 Rockers 240 rear tire 21 front 96inch S&S Black and Chrome Motor 6 speed transmission 0 miles Built for $30k. Bike has been stored in Art Gallery in doors Gallery closed. Our loss is your gain.

COOL OLD SCHOOL CHOPPER TRIKE OUT OF THE 70'S. 1950 HARLEY SERVI CAR FRAME WITH A 750 HONDA MOTOR 5 SPEED, HARD TAIL, CUSTOM FIBERGLASS BODY. RUNS GREAT, STARTS RIGHT UP.

                                                                                                                                                                      

2005 Titan Rigid Chopper I purchased this bike at Sturgis during the chopper boom. Bike has very low mileage and is in great condition. I purchased new from Titan.

Hello,  Up for auction is a 2001 custom chopper, here's what it has: -First off it's an awesome bike!!-3" BDL belt drive-200mm rear tire-hidden horn-Revtech 100 Engine-RevTech Transmission-Hydrolic Clutch-Mikuni carb-K&N filter in a velocity stack-Oil pressure guage-clear title-Obsesively maintained...-No Speedo, so the miles are an estimate This bike is built solid as a rock! Super fast and agile... If you have any questions please ask..

Very nice bike.Turns heads when riding.The chrome shows some wear,paint has very few chips all from riding not siting.Last year i put new brakes,easy clutch,clutch cable,plugs,plug wires,oil lines,change the oil to synthetic.This bike is not a hard tail base on a fx frame rides very nice.Last time I offer this bike for sale.Would like to sell so I can a different bike but o well if it don't sell that no big deal

BEAUTIFUL SILVER WITH SHADED FLAMES. 2007 SAXON SCEPTRE PRO STREET STYLE CHOPPER. S & S SUPER STOCK 1573CC VTWIN WITH 6 SPEED TRANSMISSION AND RT HAND DRIVE.

2005 PRESION CYCLE WORKS SHOVELHEAD S.S. 103"  1500 MILES 250 REAR TIRE RIVEA PREMO TRANS SHOWROOM CONDITION!!! ANY QUESTIONS CALL GREG 330-472-9383

 $14,000 INVESTED    This bike has been sitting in my office for 5 years needs to be finished everything is there JUST WIRE AND PAINT LEFT TO DO NEW 80" Harley EVO motor never ran MSO title NEW 3" BDL belt drive ALMOST NEW 5 speed HARLEY transmission NEW Custom Werks frame huge tube NEW PRO ONE front suspension\ NEW EXILE SPROTOR rear sprocket and brake rotor NEW POLISHED aluminum wheels NEW METZLER tires TOO MUCH TOOOO LIST Will Deliver Locally Will Ship at Buyers expense

***********   SINISTER CHOPPERS - RADIO FLYER   *********** ***********   AWESOME STURGIS BIKE WEEK - KILLER DEAL!!!!!!   *********** ***********   ROLL INTO STURGIS with ONE SICKASS CHOPPER!!!   ***********  Just Reduced $5k - From $45K to $40K Custom built chopper by SINISTER CHOPPERS out of Phonix, Arizona. This is a one of a kind chopper, it has won many awards and been profiled/freature in many bike magazines (Easyriders, Hot Bike, etc...)  and used for bike related advertisements worldwide. Why by a Harley-Davidson when you can own THE baddest chopper around, right on time for the riding season.

Motorcycle is a California built Johnny Pag (JPM) Spyder 300 (327 cc actual displacement) (more info @ johnnypag.com); 2010 model purchased new by current owner in summer of 2011; only has 90 kms.  Comes with a seat for 2 (not installed) and 2 helmets.  JPM dealer in Edmonton is Gateway Motor Sports (just south of Argyll Road).  Retail price is $5,495.00; selling for $4,495.00.

You are looking at a 2007 Big Bear Pro Street Sled (Manufactured by Big Bear-not the kit). This bike has many upgrades and add ons and is as clean as you can get. All services have been prompt and taken care of.

Real head-turner "Boxx Bike", original cost $100,000. One of a kind custom built by Paul Sr. and Paul Jr.  131 cubic inch H & L diamond cut, high compression (10:1, 4.5" Corvette pistons) evolution motor.  Approximately 3,000 original miles.

2000 Jackhammer Custom motorcycle. Ultra Motorcycle Company  Mira Loma CA  Lots of extras done to this fast bike.  Five speed with custom Arlen Ness forward controls, custom fenders and paint.  Arlen Ness kickstand and brakes.  4 inch primary belt drive. Jet Hot coatings on pipes.  Rigid frame. 113 ci. Hidden start button.

NO RESERVE!   (Bike will be at KBPI car show at Bandimere Speed Way on the 10th) 2006 Custom Built Motorcycles Bobber El Segundo This auction is for a Three Two Choppers “El Segundo” custom chopper with 3,500 +/- miles, painted a flat gold color. The bike measures 35” tall and 105” long on a rigid frame.

Just Rebuilt 2006 SOFTAIL JUST OVER 6000 MILES - 100 inch REVTECH motor - 6 speed REVTECH trans. - Enclosed forks - Stretched tank - 250 Wide tire kit - Fat spoke 21 inch front rim - custom LED tail lights build into fender - Vance and Hines exhaust - Arlen Ness big sucker intake New Brakes, plugs, wires, bearings and much more... I build this for a project and now its done so time to start another.

1976 Kawasaki 900 Kz Custom Built Old School Style Chopper.  All original parts, custom paint on gas tank, runs great just needs new carburetor kit. Has Springer front end, Rigid Frame, Kick Start, Motor was rebuilt in 1999 so unknown miles.  Everything on motorcycle included. Buyer is responsible for all shipping costs. 

 2005 Custom Chopper Hard Tail with a 113 ci Ultima engine with S&S Heads Backed with a Ultima 6 Sp Trans, 9.5 feet long front end by American Suspension, Paint by Hasons Custom Paint in Ar. Custom seat to match paint scheme  

I'm selling this bike for a friend who would like to keep it,but could use the money for another project that he is now involved in....This bike has only been rode a little over 3000 miles since Kevin built it.The engine in the bike was supplied by me and is a low mileage 2003 twin cam 88 engine that was taken out of my Harley bagger in 2004 when I installed a 103....The carb is a CV that has been bored to 42 mm and modified by a shop back east....The bike gets better mileage than stock and has a huge power difference over stock because of this carb....I use these carbs on Harleys that I tune and love them...The engine sits in a Daytech frame,has VHR exhaust,and uses a 6 speed trans...The bike also has a digital speedo,cutom paint,belt drive and lots of chrome...We rode about 1400 miles together a few years ago,to Reno,Nevada and back,so we traded bikes for a while...I can tell you first hand that the bike is a pleasure to ride and does everything well...For any further information call Kevin at 909 214-1846...

WAR EAGLE CUSTOM CHOPPER CLEAR TITLE AND YOU CAN FINANCE AND INSURE A WAR EAGLE MOTORCYCLE. 120" ULTIMA MOTOR / SIX SPEED TRANS. HIGHTEC OPEN PRIMARY (ADJUSTABLE OVERDRIVE PULEY'S) 300 MM REAR TIRE / 21" FRONT TIRE WAR EAGLE FRAME (ROCKSTAR) ROCKSTAR WHEELS (POWDER COATED) HAWG HALTERS BRAKES (CONTROLS AND CALIPERS) TRIPLE STEP HOT ROD PIPES BY FSD SEAT BY CUTTING EDGE.

2004 Ironworks Custom Chopper from Orlando, Fl.  Approx 10,000 miles.  1600 cc RevTech engine.

This bike is in mint condition,it has a 113 s&s motor ,13,000 miles, garage kept vance &hines pipes,she is a rocket .It is a soft tail and i have riden 200 miles and was comfortable the whole time..i am yhe second owner for about 3 years .Only reason i am selling it is i bought an ultra classic and have been enjoying the time with my wife riding with me..i hate to see an awsome bike like her just sit there..it has been maintained by nothing but the best guys here on long island..she also has a six speed for those long rides..call me for any info @ 516-983-9513..Tommy

18" over springer front end /120 cubic inch ultima engine /belt drive 3.5 inches /custom paint by coup /hellworks frame nice bike for some youger than me.Rides great on highway.If you need more info call 816-288-0989 bike sold as is but i don't know of any defects.No warranty

Pictures do not do this Custom XR1000 justice. Over 30k in custom work!!! To many options to list, but here are a few: Custom PaintSingle Sided swing armCustom RimsCustom hand gripsAir rideAngel eyesHand warmerOhlins steering stabiliserM4 full exhaustPower commander 3 Custom Radar mount Plus much more.....

  Frame by Chassis Design,  drop seat with a 40 degree rake. Motor is an 96 S&S with ultima 6 speed tranny…DNA Springer front end, Z bars and speedo and 280 avon rear tire. Excile sprotor rear braking system, P&M front brake  

2001 Ultima Half Breed Custom with Rev Tech Engine.. This is a custom Harley we took on trade at our dealership, don't do a lot with Harleys so here is your chance to get a nice bike at a great price.. If you have any questions please let us know..

Up for sale is my friends 2001 Razorback Big Boar Chopper. It has a ridged frame. The engine is a Total Performance polished aluminum 107 cubic inch .

Awesome 2009 Chopper Trike Less than 100 miles, Built for show or go, Award Winner. 1340 cc EVO, Diamond cut motor, Softail suspension, Samson exhaust, Champion reverse. H-D Grips, pegs and mirrors. Pro one front end, leather seat, drag specialty gauges, 21 inch Fat Daddy Wheel, Custom paint, paint is a dark burgundy with real fire and pin stripped flames. This Trike is a real head turner!

No other Trike like it custom built by me.Kraft tech EVO soft tail main frame ,DNA springer front end DNA trike swing arm and DNA limited slip rearend with Disc brakes,..96"S&S super stock   EVO motor( Black ) ,6 speed revtech transmission with Hydraulic clutch,,3' BDL open primary Vance and Hines short shot exhaust ,old skool cadillac spoke rims from wheel vintiques with 3"white walls,brembo forward controls ,bike is completely powder coated flat black approx 20% sheen. current Ca registration and title ,No other bike like it !! less than 1500 mi since it was completed . Runs perfectly and rides great .

Very nice custom chopper with a 127 CI S&S motor & Trans. This is a softail bike with a good ride. I am not that knowledgeable on these bikes so I cannot tell you a whole lot of technical aspects of the bike other than engine size,127 CI S&S, rear tire size, (250) and that it is very sharp and practically new.

Beautiful Custom build chopper- new tired, new pipes-runs great! must see, serious buyers only-     Easy Rider replica museum quality /Dennis Hopper but a daily driver

  2007 ASPT (assembled from parts) BOBBER Multiple Show Winner (40+/- local trophies)   I'm selling this bike because I was in a near-fatal accident on my other bike over a year and a half ago and I can't ride any longer. It was maintained meticulously and never abused. If not for the accident, it would not be for sale.

2006 John custom chopper!  Only 555 original miles!  In almost mint condition!

This motorcycle is absolutely gorgeous and surprisingly easy to ride, handles the best of any of my choppers..I LOVE MY BIKE!! I don't really want to see it go but have others that I ride more now. Currently it's featured in the summer edition of "Chromed Out" mag .com  Features:124 cubic inch S&S Sidewinder that was custom tuned when built..runs better then a reg 124"Shorty stack intake280 rearbelt driven open primaryBaker 6 SpeedDakota Digital speed-oIntegrated blinkers in mirror and tail stripNo odometer..estimated miles is 4-5k Pictures never do it justice!!

this is on bad chopper, it has the best of everything and built by the best. shannon davidson at the chop shopp put the bike together, gasoline arts the painter for jesse james done all the air brushing. the bike has been rode around for some photos which it has about 14 miles on it.

39 MM narrow glide front fork-dual 11.5 floating disk w/ 6 piston calipers-(N) 21" 60 spoke wheel (N) 21" tire-custom headlight w/ working high beam indicator-custom LED in frame blinkers-Flanders handel bars cut narrowed plugged re-chromed (just like 1965)-custom flat bottom sportster tank w/ high flow petcock-custom seat w/ air ride (on-board compressor)-Bates rear seat (1965)-custom rear fender cut  / sectioned to follow radius of rear wheel-custom passenger foot pegs fabricated from  pan-head brake clevis (very small very unique) Custom sissy-bar w/ cats-eye taillight- 18" rear 60 spoke wheel w/ 180 tire in great condition-rear 11.5 floating disk w/ 6 piston caliper-custom one of a kind mid controls- custom exhaust 1.75 to 2.25 w/ heat shields-3.5 Primo belt drive w/ lockup clutch-(N) Lectron 50mm carburetor-Jims 120" twin-cam- 680 T-man gear drive cams-heads flowed to twice the volume of 120" Screamin Eagle heads w/ 4 spark plugs-all other motor parts, roller rockers lifters push rods oil pump etc. are high performance  supplied by Jims Racing (so cal)- Jims 5 speed w/ pro-cut gears- o-ring chain-Crane Hi-4 ignition custom mounted-Paco frame no stretch no rake (1965) modified w/ custom gussets and stroker bars-custom paint and striping is beautiful and period correct for a 1965 build.   Approximately 6500 total miles (no odometer).  Maybe 250 after (N)  carb and cams  Last dyno 130 hp and 145 ft lbs tork.

$100 deposit non refundable, Buyer can do a Full inspection on site in Crowley Texas, Payment after complete inspection.  The bike cost $20K to build. THE PICTURES ARE OF THE ACTUAL BIKE FOR SALE. FRAME: CUSTOM BUILT RIGID 300; DOUBLE DOWN TUBE FRONT END: WIDE GLIDE ENGINE: 113 S&S SUPER POLISHED W/ EXOTIC PAN BOY KIT TRANS: BAKER RIGHT SIDE DRIVE; CHROME PRIMARY DRIVE: BDL BLACK ANODIZED W/ CUSTOM MACHINE WORK REAR FENDER: CUSTOM FIT TANK: METAL SHOP CUSTOMS; CUSTOM TANK FOOT CONTROLS: TOP SHELF MID CONTROLS; BLACK ANODIZED W/ HYDRO SUICIDE CLUTCH & BRAKE HAND CONTROLS: INTERNAL THROTTLE BRAKES: SPROTER REAR BRAKE PIPES: METAL SHOP CUSTOMS; DRAG PIPE HI SIDE HANDLEBARS: MINI APEHANGERS; 12" CUSTOM MINI "Z" STYLE; CHROME SEAT: BLACK SPRING SEAT PAINT: CANDY TANGERINE ORANGE W/ GRAPHICS AIR CLEANER: RSD VTECH; BLACK ANODIZED   THIS IS A SHOW BIKE THAT HAS WON MANY SHOWS AND IT IS LOUD, FAST, FUN.

brand new build only test miles have all mso to register at dmv   all new components  turn key //twin cam engine// ready for spring season //only ridden locally to shows have all mso  papers to register at dmv twin cam powered  //6 speed //molded 400 hrs on metal fab //call 585 544 9924 mike for more info //drives ez set up to ride n show too   started as a complete roller from fatmans cycle ///ss cased//oem harley twin cam inners // ultima driveline //thunderheart breaks //330 rear //21 ftr //fully molded //just got back from bike there was only a few bikes w/ this detail //paint has ghost tribal images //shines like new but a few flaws not perfect but close //u have to really look to find //starts drives like it should //have 3 mso needed to register //has hyd clutch all new components ///none used   n

2003 CUSTOM MOTORCYCLE CHOPPER BUILT BY LAKE NORMAN V -TWIN 124 S&S POLISHED MOTOR  6 SPEED TRANSMISSION PRO 1  DAYTECH ,SOFT TAIL CHASSIS CAROLINA CUSTOM CHROME WHEELS, 250 REAR TIRE  EEL SKIN SEAT, 5400 MILES This bike cost $ 52,000.00 new! Show winner at Bike Shows!  This bike not only looks good it rides good, and is definitly a head turner!