1993 Harley Fxlr Custom on 2040-motos
Harley-Davidson FXR tech info
Harley-Davidson FXR description
If you know Harleys, this bike is the "holy grail" of Harleys...the best
riding bike Harley ever made. Don't confuse a Dyna with an FXR. The FXR
frames, designed by Eric Buell, became too expensive for HD to make. It
was designed for a four cylinder engine (Nova project) HD had to
compete with the four cylinder Hondas. The Nova project died, but HD
used the frame anyway. This bike is as light as a Sportster...this one
especially because of the abundance of aluminum in here. It has $2,800
Ceriani GCB forks. Rides like a Lincoln on the highway and a Porsche in
the corners. I've never seen a better built FXR than this one and it's
in your area. Over $17,000 in this bike and it only has 23,000 miles on
it. Here's the build list:
Performance Machine Chicane front wheel - spun aluminum light weight ($1,500)
Performance Machine Aero rear wheel - spun aluminum light weight ($1,500)
Performance Machine calipers ($900) (#1213-0017 Front)(#1268-0052 Rear)
Performance Machine Classic rotors - 13" floating in front ($400)
Performance Machine Contour foot pegs (all six) ($540)
Performance Machine Renthal grips ($120)
Performance Machine billet front brake fluid housing ($370)
Ceriani GCB (Gazzaniga, Ceriani & Bianchi) 43mm "Special Forks" ($2,800)
Progressive brand billet 418 rear shocks with adj. pre load and dampening ($500)
ART billet transmission side plate
Andrews back cut gears
Primo/Rivera Brut Classic belt drive with high performance clutch plates ($1,600)
Carlini torque arm ($300)
Stainless steel brake lines
Crane HI-4 Ignition with single fire coils ($450)
Supertrapp 2-into-1 tunable (discs) ceramic coated exhaust ($1,500)
Bobtail rear fender
Custom "California boy" old school paint job (base is deep purple, looks black)
(2008)
Corbin leather seat ($400)
"Magic" head work (porting, polishing and flow work) by Wes at Cycle Rama in
Daytona Beach, FL.
Ross brand 10.5:1 compression pistons from Cycle Rama
Billet lifters and blocks from Cycle Rama
Crane .600 cam
Mikuni HSR45 high performance carb. ($500)
Arlen Ness side covers ($200)
Arlen Ness chin spoiler concealing an oil cooler and horn. ($200)
New swing arm bushings (2008)
New battery (2008)
Pingel petcock ($150)
Avon Venom tires
Dash warning / signal indicators replaced and correctly wired into junction
connectors.
Kuryakn turn signals installed and correctly wired into connectors (2011) ($170)
Kuryakn Eclipse mirrors. ($80)
May & June 2012 - New battery, stator, voltage regulator and primary belt.
The paint around the filler neck develops a bubble on hot days that goes down when it cools off. Been that way for years. Small nick on front fender, otherwise appears as it would if it were a few years old instead of 20. Check my feedback rating (over 625 and all positive) as well as the comments, and bid with confidence. I'm a retired old fart and this bike is just too much of a beast for me . It dyno'd at 95/96 and weighs less than a Sportster. I feel that these FXRs are the best riding Harleys ever built, and his is one of the best FXRs anywhere, but I'm kinda biased.
Harley-Davidson FXR for Sale
- 1986 harley fxr. rare touring hard bags!!(US $5,995.00)
- $6,500 o.b.o.(US $6,500.00)
- 2002 harley davidson(US $6,800.00)
- 1993 harley fxr,custom,bobber(US $6,700.00)
- Totally customized harley davidson super glide fxr low rider(US $6,000.00)
- 1990 fxrs-conv. low rider (1200 miles on 89" stroker motor)(US $2,000.00)
Moto blog
Harley-Davidson’s New Facebook App Allows Fans to Shape H-D Marketing
Tue, 08 Nov 2011Harley-Davidson has advanced its “crowdsourcing” marketing strategy to the next phase. The Motor Company announced today Fan Machine, a new app for its Facebook presence. The app is a conduit for fan-submitted marketing ideas.
Preliminary Lineup for Harley-Davidson 110th Anniversary Concerts Announced
Fri, 05 Apr 2013Harley-Davidson released a preliminary list featuring some of the musical acts performing during the company’s 110th anniversary celebrations. The acts will share the stage at Milwaukee’s Henry Maier Festival Park (A.K.A. Summerfest Grounds) from Aug.
Harley-Davidson Adds Twin Cam 96 and 103 Engines to Factory Remanufacturing Program
Tue, 17 Jan 2012Harley-Davidson has added the Twin Cam 96, Twin Cam 103 and 2003-2006 CVO Twin Cam 103 engines to its engine remanufacturing program. The program, which previously accepted 1984 and newer Evolution 1340, Twin Cam 88, Twin Cam 88B and Twin Cam 95 powerplants, takes used engines, rebuilds and repaints them. Customers can take their existing Harley-Davidson motorcycle to a dealer which will remove the engine and send it back to the factory.
Harley-Davidson FXR by State
| Harley-Davidson FXR by City | Harley-Davidson FXR by Color |